Functional Appliances & Myofunctional Therapy in Austin

Functional appliances apply controlled orthopedic force during the active growth window between ages 7 and 13 to guide jaw development before the bite is locked in. Limestone Hills uses Bionator and Activator monobloc appliances and Angel A6 mandibular advancement aligners, depending on the diagnosis. The 3D CBCT scan at the free consultation confirms growth potential and skeletal pattern before any appliance is ordered.

  • DDS, PhD
  • 4.9★ 220+ Reviews
  • Mon-Sun 7:30 AM - 10:30 PM · Emergency Hours · By Appointment Only
  • Active Orthopedic Force
*Free consultation for new patients only. Patients in treatment $150, deductible from comprehensive treatment fee.
Young girl receiving a dental examination for tongue thrust assessment, with myofunctional therapy options available at Limestone Hills Orthodontics in Austin, TX.

What “Functional” Means in Orthodontics

In Austin, TX, at Limestone Hills Orthodontics, a dentist examines a patient's mouth, discussing functional appliances & myofunctional therapy.

A functional appliance is a removable device that guides jaw growth in growing children. Unlike braces, which move teeth within an established jaw position, functional appliances change how the upper and lower jaws grow relative to each other.

The active growth window runs from roughly age 7 through age 12 or 13 in girls and into the mid-teens in boys. Inside that window, controlled orthopedic force can produce real skeletal change. Outside it, the same device just tips teeth.

Limestone Hills uses two categories of functional device. Acrylic monobloc appliances (Bionator, Activator) hold the lower jaw in a forward position so muscle activity and ongoing growth reposition the mandible.

Clear aligners with built-in advancement blocks (Angel A6 mandibular advancement, Angel protraction for Class III) apply the same orthopedic force inside a removable aligner that the patient is already wearing for tooth alignment, which collapses two phases of treatment into one.

The CBCT scan at the free consultation captures growth-plate maturity, condylar position, and airway dimensions in three dimensions. Dr. Viecilli reads the scan personally and confirms whether the growth window is open before any appliance is ordered. Not every Class II or Class III diagnosis warrants a functional appliance.

The recommendation depends on age, growth pattern, severity of the discrepancy, and whether the patient can wear the appliance the prescribed hours per day.

Orthopedic Appliances vs. Behavioral (Myofunctional) Therapy

The word functional covers two related but distinct approaches. Orthopedic appliances apply measurable force to the growing jaw bones to change their position. Myofunctional therapy retrains the tongue, lips, and swallowing muscles through daily exercises so the patient’s own muscle patterns stop working against the bite.

Most comprehensive treatment plans at Limestone Hills Orthodontics use both. Appliance forces the skeleton, exercise protocols to hold the result.

Approach What It Does Used At Limestone Hills
Orthopedic appliance Applies measurable force to the growing jaw bones to reposition them. Most effective ages 7 to 13. Worn 14 to 22 hours per day, depending on the appliance. Bionator, Activator, Angel A6 mandibular advancement, Angel protraction.
Behavioral (myofunctional) therapy
Daily exercise protocol that retrains the tongue, lips, and swallowing muscles. Effective when habit-driven muscle patterns contribute to the bite. Does not apply orthopedic force.
Co-managed with credentialed myofunctional therapists when indicated; not delivered in-house. Limestone Hills integrates exercise prescriptions into the appliance plan and refers for hands-on therapy when the case warrants.
Generic habit trays
(e.g., Myobrace)
Soft silicone trays worn 1 to 2 hours per day, plus overnight, to encourage tongue posture and nasal breathing. Passive, not force-delivering.
Not offered. Children with skeletal discrepancies need measurable orthopedic force; passive trays do not produce the skeletal change these patients need.

Class II Correctors for Growing Patients

Class II describes a skeletal pattern where the lower jaw sits behind the upper jaw, often producing a recessed chin profile and prominent upper front teeth.

Functional Class II correction works during active growth by holding the lower jaw in a forward position long enough for the muscles, ligaments, and condylar growth plates to remodel around the new posture. After 12 to 18 months of compliant wear, the lower jaw often holds the corrected position without further appliance support.

Bionator

An acrylic monobloc that fits over both arches and holds the lower jaw forward. Smaller and more comfortable than the Activator. Worn 14 to 16 hours per day, typically including overnight. Most useful in younger children (ages 8 to 11) and in cases where the bite needs jaw advancement without significant vertical opening.

Often used as an enhanced retainer after initial Class II correction, so the bite stays put through continued growth.

Activator

Larger acrylic block that advances the lower jaw and opens the bite vertically at the same time. More effective than the Bionator in deep-bite cases where the upper teeth cover most of the lower teeth. Worn 14 to 16 hours per day. Best fit for ages 9 to 13 with an established Class II and deep bite combination.

Angel A6 Mandibular Advancement

Clear aligners with built-in advancement blocks that guide the lower jaw forward, while the same trays also align the teeth. The patient wears one set of appliances for both skeletal correction and tooth alignment instead of completing functional therapy first and braces second.

Aligners are swapped on a regular schedule, so a lost set is replaced at the next appointment with the next set in the sequence rather than a 2-to-4-week lab fabrication delay. Worn 22 hours per day. Stiffer material than Invisalign for better force delivery to growing jaws.

Limestone Hills selects the A6 for most growing Class II patients who can comply with full-time aligner wear.

Bionator and Activator remain available when the bite requires specific vertical control that aligners cannot deliver, or when a younger patient is not ready for full-time aligner wear. Dr. Viecilli selects the right tool for the diagnosis at hand, not the most convenient one.

When Functional Appliances Work Best

Functional appliances are most effective during the active skeletal growth window. The American Association of Orthodontists recommends a first orthodontic evaluation by age 7, specifically because skeletal discrepancies are easier to correct while there is still growth potential to redirect.

The CBCT scan at the Limestone Hills consultation shows whether the growth window is open in three dimensions rather than guessing from a flat panoramic X-ray.

Overbite (Class II)

The lower jaw sits too far back. Upper front teeth protrude. Chin appears recessed. Bionator, Activator, or Angel A6 guides the lower jaw forward during growth.

Underbite (Class III)

The lower jaw or lower teeth sit ahead of the upper. Chin appears prominent. Angle protraction encourages upper jaw development while restraining lower jaw advance. For younger Class III cases (ages 7 to 10), facemask therapy combined with palatal expansion is the most predictable early-treatment pathway.

Deep Bite

Upper front teeth cover the lower front teeth excessively. The Activator opens the bite vertically while correcting the underlying jaw relationship. In adults or post-growth patients, deep-bite correction shifts to intrusion mechanics with braces, aligners, or TADs rather than functional appliances.

Post-Correction Retention

After initial jaw correction (expansion, headgear, early braces), a Bionator can hold the corrected position while the child continues to grow. The appliance acts as a biological retainer through the remaining growth window so the bite does not relapse before the patient transitions to comprehensive orthodontics.

Not every child needs a functional appliance. The recommendation comes from the diagnostic data: CBCT-confirmed growth potential, the specific skeletal pattern, and the patient’s ability to comply with the prescribed wear schedule.

What Functional Appliances and Myofunctional Care Cost

Bionator or Activator: +$1,000 add-on to comprehensive treatment.
Angel A6 mandibular advancement: included in the Angel comprehensive aligner fee.
Angel protraction (Class III): included in the Angel comprehensive aligner fee.

Bionator and Activator appliances are $1,000 each when added to a comprehensive treatment plan. The fee covers fabrication, fitting, and all adjustments for the duration of active wear. Angel A6 mandibular advancement and Angel protraction are priced as part of the underlying Angel aligner treatment fee, so there is no separate functional-appliance line item.

Most PPO orthodontic benefits apply to the comprehensive case the appliance attaches to. OrthoSync 0% in-house financing, CareCredit, Cherry, and a 3% pay-in-full discount are all available.

Community discounts (military, teachers, first responders, healthcare workers, family) apply when the appliance is part of a comprehensive plan. The free CBCT scan at consultation generates a written treatment-fee estimate before any commitment.

Frequently Asked Questions

What is a functional appliance?

A removable device that guides jaw growth in growing children. It repositions the jaw and trains the muscles to support the new position. Unlike braces, functional appliances change how the upper and lower jaws grow relative to each other. Most effective during the active growth window between ages 7 and 13.

What is the difference between a Bionator, Activator, and Angel A6?

Bionator and Activator are acrylic monobloc appliances. Both guide the lower jaw forward during growth. The Bionator is smaller and more comfortable; the Activator is bulkier but more effective for deep bites because it opens the bite vertically at the same time. Both are worn 14 to 16 hours per day.

The Angel A6 is a clear aligner with built-in advancement blocks that guide the lower jaw forward while also aligning the teeth. Worn 22 hours per day. The A6 collapses the functional and braces phases into one.

Why does Limestone Hills prefer Angel A6 over Bionator or Activator for most growing patients?

Two reasons. Compliance: removable appliances get lost (left in cafeteria napkins, fallen out of pockets, chewed by the family dog), and each lost appliance requires a new impression and a 2 to 4 week lab delay.

Aligners are swapped on a regular schedule, so a lost set is replaced at the next appointment with the next set in the sequence. Phase consolidation: A6 aligners deliver functional correction and tooth alignment in the same trays, so the patient does not finish a Bionator and then start braces months later.

Bionator and Activator remain available when the bite needs vertical control aligners cannot provide

How long does treatment take?

Active treatment with a Bionator or Activator typically runs 12 to 18 months at 14 to 16 hours per day. Most patients then transition to braces, aligners, or monitoring depending on the residual diagnosis. Angel A6 mandibular advancement runs 12 to 24 months end-to-end because the same aligners also handle tooth alignment.

Treatment time depends on the severity of the underlying skeletal discrepancy and on wear compliance.

How much does it cost?

Bionator and Activator are +$1,000 each when added to a comprehensive treatment plan. The fee covers fabrication, fitting, and all adjustments through active wear. Angel A6 mandibular advancement and Angel protraction are priced within the comprehensive Angel aligner treatment fee, with no separate functional-appliance charge.

Community discounts apply when the appliance is part of a comprehensive plan. OrthoSync 0% in-house financing is available.